Team Equipment K760 Cut-N-Break Saw

Team Equipment Husqvarna K760 Cut-n-Break Saw with Blades

The Team Husqvarna K760 Cut-n-Break Saw with Blades is suitable for precision openings for doors, windows, HVAC ductwork, pipes and more can be economically made using the Cut-n-Break system.

Ideal for window and door openings where you don't want overcutting at the corners.

Grooves can be quickly cut to create a channel for up to 3/4" wide, perfect for water lines and electrical conduit in a single pass.

The double blade system also aids in faster crack renovation and expansion joint repair.

Excellent for cutting when burying signal cables.

Integrated water head kit.

Features:

• Wet cutting only
• Dual 9" Diamond concrete Blades included
• Depth of Cut: 2-1/2" per pass with a maximum of 16"
• Air cooled, 2-cycle 4.8hp / 71cc engine
• 22.3 lbs. complete with blades
• Standard arbor bushing 1'' (25.4 mm)
• SmartCarb, a built-in automatic filter compensation, maintains high power and lower fuel comsumpton
• Active Air Filtration, centrifugal air cleaning, extends product life and service intervals
• EasyStart provides 50% easier starts
• DuraStarter reduces wear on the starter
• The Cut-n-Break method allows you to cut in stages through walls up to 16" thick
• Each cut can be up to 2.5" deep
• Since the cutter has twin blades, a core is formed in the saw cut
• The core can easily be broken off, using the accompanying breaking tool
• When the core has been broken off, continue cutting until the required depth is reached, Maximum 16"

K760 Cut-n-Break General Information:

• The new K760 Cut-n-Break features an entirely new cutting method for cuts as deep as 16" (400 mm) at a very economical tooling cost.
• The K760 Cut-n-Break has a wide range of applications. It eliminates over-cutting on all types of openings requiring square corners. Precision openings for doors, windows, HVAC ductwork, pipes and more can be economically made using the Cut-n-Break system.
• The design of the power head is based on one of the most popular cut-off saws in the industry, the K760. This means the engine has all the classic Husqvarna benefits, such as the revolutionary Active Air Filtration filter system, the SmartCarb carburetor, EasyStart, sealed transmission and a lot more.
• The new K760 Cut-n-Break is easy to use and maintain with low tooling and maintenance costs.
• CUT IN STAGES THROUGH WALLS UP TO 16" (400 mm) THICK.
• Each cut can be made up to 2-1/2" (65 mm) deep.
• The twin blades form a core in the saw cut.
• The core is simply broken away using the breaking tool that is supplied with the K760 Cut-n-Break.
• When the core has been broken away, repeat the cut until the required cutting depth is achieved. Maximum 16" (400 mm).