Hale HPX450-B35 Firefighting Pump

Hale HPX450-B35 Firefighting Pump



The Hale HPX450-B35 Attack Max Firefighting Pump is conveniently designed for easy of use and high capacity.

Flows: (see above pump curve under picture of pump)
550 GPM @ 45 PSI
400 GPM @ 75 PSI
250 GPM @ 100 PSI

Power is provided by the respected Briggs & Stratton Vanguard Engine. The Vanguard power comes from a reliable state-of-the-art, air cooled, 35 BHP, V-twin, Overhead Valve (OHV) engine.

The overhead valve design delivers more power than conventionally designed side-valve engines. It has an electric starter to ensure starting under all conditions.


Features:

• Skid/Truck Mount
• 35hp Briggs & Stratton Gasoline engine
• Electric start/ manual recoil backup
• Guzzler hand primer
• Control Panel (ships loose)
• Flows ranging from 250 GPM @ 100 PSI to 550 GPM @ 45 PSI
• Ultra-reliable Briggs & Stratton 35-HP 4-cycle V-Twin big bore gasoline engine
• Electric start with recoil backup
• Anodized aluminum alloy pump head and body
• Pump head and body coupled together with stainless steel band clamp for easy serviceability
• Bronze impeller and renewable wear rings
• Self-adjusting mechanical seal
• 6' wiring harness

X-Stream Control Panel:

• X-Stream with discharge gauge
• Start button
• ON/OFF switch
• Oil warning light
• Choke & throttle control

Specifications:

Length:		24" inches
Width:		23.5" inches
Height:		24.5" inches
Weight:		190 lbs (86 kg)
Suction Connection:		4.0" Victaulic
Discharge Connection:		3.0" Female NPT
Body and Head:		Lightweight, high strength, anodized aluminum
Pump Shaft:		Engine shaft with bronze sleeve
Impeller:		Enclosed type, silicon bronze
Clearance Rings:		Renewable type, bearing bronze
Gear Box:		Direct drive
Priming:		USFS Guzzler hand primer (optional ESP-12 electric rotary vane primer)
Type:		Low Pressure, High Volume
Max Pressure (PSI):		100 PSI
Max Flow (GPM):		600 GPM
NFPA 1906 Rated Capacity:		150 GPM @ 100 PSI

*NOTE: not for sale or use in California